Add Authorization to Your Flask API Application

This guide demonstrates how to integrate Auth0 with any new or existing Python API built with Flask.

If you haven't created an API in your Auth0 dashboard yet, you can use the interactive selector to create a new Auth0 API or select an existing API that represents the project you want to integrate with.

Alternatively, you can read our getting started guide that helps you set up your first API through the Auth0 dashboard.

Every API in Auth0 is configured using an API Identifier that your application code will use as the Audience to validate the Access Token.

1

Define permissions

Permissions let you define how resources can be accessed on behalf of the user with a given access token. For example, you might choose to grant read access to the messages resource if users have the manager access level, and a write access to that resource if they have the administrator access level.

You can define allowed permissions in the Permissions view of the Auth0 Dashboard's APIs section.

Configure Permissions

Configure Flask to Use Auth0

2

Install dependencies

Add the following dependencies to your requirements.txt:

# /requirements.txt

flask
Authlib

Was this helpful?

/
3

Create the JWT validator

We're going to use a library called Authlib to create a ResourceProtector, which is a type of Flask decorator that protects our resources (API routes) with a given validator.

The validator will validate the Access Token that we pass to the resource by checking that it has a valid signature and claims.

We can use AuthLib's JWTBearerTokenValidator validator with a few tweaks to make sure it conforms to our requirements on validating Access Tokens.

To create our Auth0JWTBearerTokenValidator we need to pass it our domain and audience (API Identifier). It will then get the public key required to verify the token's signature and pass it to the JWTBearerTokenValidator class.

We'll then override the class's claims_options to make sure the token's expiry, audience and issue claims are validated according to our requirements.

4

Create a Flask application

Next we'll create a Flask application with 3 API routes:

  • /api/public A public endpoint that requires no authentication.
  • /api/private A private endpoint that requires a valid Access Token JWT.
  • /api/private-scoped A private endpoint that requires a valid Access Token JWT that contains the given scope.

The protected routes will have a require_auth decorator which is a ResourceProtector that uses the Auth0JWTBearerTokenValidator we created earlier.

To create the Auth0JWTBearerTokenValidator we'll pass it our tenant's domain and the API Identifier of the API we created earlier.

The require_auth decorator on the private_scoped route accepts an additional argument "read:messages", which checks the Access Token for the Permission (Scope) we created earlier.

Make a Call to Your API

To make calls to your API, you need an Access Token. You can get an Access Token for testing purposes from the Test view in your API settings.

Obtain a JWT

Provide the Access Token as an Authorization header in your requests.


curl --request GET \
  --url http://your-domain.com/api_path \
  --header 'authorization: Bearer YOUR_ACCESS_TOKEN_HERE'

Was this helpful?

/
var client = new RestClient("http://your-domain.com/api_path");
var request = new RestRequest(Method.GET);
request.AddHeader("authorization", "Bearer YOUR_ACCESS_TOKEN_HERE");
IRestResponse response = client.Execute(request);

Was this helpful?

/
package main

import (
	"fmt"
	"net/http"
	"io/ioutil"
)

func main() {

	url := "http://your-domain.com/api_path"

	req, _ := http.NewRequest("GET", url, nil)

	req.Header.Add("authorization", "Bearer YOUR_ACCESS_TOKEN_HERE")

	res, _ := http.DefaultClient.Do(req)

	defer res.Body.Close()
	body, _ := ioutil.ReadAll(res.Body)

	fmt.Println(res)
	fmt.Println(string(body))

}

Was this helpful?

/
HttpResponse<String> response = Unirest.get("http://your-domain.com/api_path")
  .header("authorization", "Bearer YOUR_ACCESS_TOKEN_HERE")
  .asString();

Was this helpful?

/
var axios = require("axios").default;

var options = {
  method: 'GET',
  url: 'http://your-domain.com/api_path',
  headers: {authorization: 'Bearer YOUR_ACCESS_TOKEN_HERE'}
};

axios.request(options).then(function (response) {
  console.log(response.data);
}).catch(function (error) {
  console.error(error);
});

Was this helpful?

/
#import <Foundation/Foundation.h>

NSDictionary *headers = @{ @"authorization": @"Bearer YOUR_ACCESS_TOKEN_HERE" };

NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:@"http://your-domain.com/api_path"]
                                                       cachePolicy:NSURLRequestUseProtocolCachePolicy
                                                   timeoutInterval:10.0];
[request setHTTPMethod:@"GET"];
[request setAllHTTPHeaderFields:headers];

NSURLSession *session = [NSURLSession sharedSession];
NSURLSessionDataTask *dataTask = [session dataTaskWithRequest:request
                                            completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
                                                if (error) {
                                                    NSLog(@"%@", error);
                                                } else {
                                                    NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response;
                                                    NSLog(@"%@", httpResponse);
                                                }
                                            }];
[dataTask resume];

Was this helpful?

/
$curl = curl_init();

curl_setopt_array($curl, [
  CURLOPT_URL => "http://your-domain.com/api_path",
  CURLOPT_RETURNTRANSFER => true,
  CURLOPT_ENCODING => "",
  CURLOPT_MAXREDIRS => 10,
  CURLOPT_TIMEOUT => 30,
  CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
  CURLOPT_CUSTOMREQUEST => "GET",
  CURLOPT_HTTPHEADER => [
    "authorization: Bearer YOUR_ACCESS_TOKEN_HERE"
  ],
]);

$response = curl_exec($curl);
$err = curl_error($curl);

curl_close($curl);

if ($err) {
  echo "cURL Error #:" . $err;
} else {
  echo $response;
}

Was this helpful?

/
import http.client

conn = http.client.HTTPConnection("your-domain.com")

headers = { 'authorization': "Bearer YOUR_ACCESS_TOKEN_HERE" }

conn.request("GET", "/api_path", headers=headers)

res = conn.getresponse()
data = res.read()

print(data.decode("utf-8"))

Was this helpful?

/
require 'uri'
require 'net/http'

url = URI("http://your-domain.com/api_path")

http = Net::HTTP.new(url.host, url.port)

request = Net::HTTP::Get.new(url)
request["authorization"] = 'Bearer YOUR_ACCESS_TOKEN_HERE'

response = http.request(request)
puts response.read_body

Was this helpful?

/
import Foundation

let headers = ["authorization": "Bearer YOUR_ACCESS_TOKEN_HERE"]

let request = NSMutableURLRequest(url: NSURL(string: "http://your-domain.com/api_path")! as URL,
                                        cachePolicy: .useProtocolCachePolicy,
                                    timeoutInterval: 10.0)
request.httpMethod = "GET"
request.allHTTPHeaderFields = headers

let session = URLSession.shared
let dataTask = session.dataTask(with: request as URLRequest, completionHandler: { (data, response, error) -> Void in
  if (error != nil) {
    print(error)
  } else {
    let httpResponse = response as? HTTPURLResponse
    print(httpResponse)
  }
})

dataTask.resume()

Was this helpful?

/

Next Steps

Excellent work! If you made it this far, you should now have login, logout, and user profile information running in your application.

This concludes our quickstart tutorial, but there is so much more to explore. To learn more about what you can do with Auth0, check out:

  • Auth0 Dashboard - Learn how to configure and manage your Auth0 tenant and applications
  • auth0-python SDK - Explore the SDK used in this tutorial more fully
  • Auth0 Marketplace - Discover integrations you can enable to extend Auth0’s functionality

Did it work?

Any suggestion or typo?

Edit on GitHub
Sign Up

Sign up for an or to your existing account to integrate directly with your own tenant.